Tilt Sensor Vibration Alarm Vibration Switch Module for Arduino

Description

[Vibration Sensor] SW-460D SW-520D SW18020P SW18015P Tilt Sensor Switch The Tilt Sensor Vibration Alarm Vibration Switch Module for Arduino come with the basic components for operation. Supplying power and it is good to be used. Attach it to object and it will detect whether the object is tilt. Simple usage as it is the digital output, so you will know the object is tilt or not by reading the output. It uses SW-460D or SW-520D tilt sensor. The Tilt Sensor is the ball rolling type, NOT Mercury type. Comes with an M3 mounting hole for ease of attaching it to an object. On board, it provides a tilt switch, high sensitivity and commonly being used for tilt detection. The module comes with power LED and status LED for the visual indicator. The module will output logic LOW when the module is not tilted until the threshold angle; it will output logic HIGH when it is tilted over the threshold angle. We have tested, the tilt angle is quite big, from 45 degrees to 130 degrees. However, it depends on the angular velocity too. It can be used as a vibration sensor too. It can be interfaced with any microcontroller with digital input such as 8051, PIC, SK40C, SK28A,SKds40A, Features – Ball Rolling type of tilt sensor. This small module is easy to use. Afixed bolt hole for easy installation Wide voltage LM393 comparator PIN CONNECTION: VCC = 5V GND = 0V. DO = digital output from module NOTE: IF THE DO IS NOT WORKING, YOU MIGHT NEED TO TURN THE ON-BOARD POTENTIOMETER TO CENTER.

🔹 Key Features

• •Supplying power and it is good to be used
• •Attach it to object and it will detect whether the object is tilt
• •Simple usage as it is the digital output, so you will know the object is tilt or not by reading the output
• •It uses SW-460D or SW-520D tilt sensor
• •The Tilt Sensor is the ball rolling type, NOT Mercury type
• •Comes with an M3 mounting hole for ease of attaching it to an object

🔹 Pin Configuration & Wiring

Interactive Silicon Pinout & GPIO Mapping

ESP32 DevKitArduino Uno

All PinsI2C / SPI / UARTADC AnalogDigital GPIOPower & GND

5V3.3VPin 13 (SCK)Pin 11 (MOSI)Pin 9 (PWM)Pin A0Pin A4 (SDA)Pin A5 (SCL)

COMM PIN

Pin 13 (SCK)

Electrical Limit: 5.0V Max

Board Logic

5V Logic (7-12V VIN)

Mapped Silicon Functions

SPI SCK (Clock)Built-in 'L' LED

Hardware Engineering Note

Connected directly to onboard yellow LED and SPI hardware clock bus.

Arduino / C++ Quick CodeReady to flash

pinMode(LED_BUILTIN, OUTPUT);
digitalWrite(LED_BUILTIN, HIGH);

Verified Genuine Silicon Layout100% Physical Pin Match

🔹 Applications

This component is engineered and suitable for:

• •Microcontroller interfacing (Arduino, ESP32, Raspberry Pi, STM32)
• •IoT telemetry, environmental monitoring, and smart home systems
• •Robotics navigation, obstacle detection, and motion sensing
• •STEM education, university electronics labs, and maker prototyping

🔹 Package Includes

• ✓1 × Tilt Sensor Vibration Alarm Vibration Switch Module for Arduino