Fence Sink Bracket for 9CM Cooling Fan 3.5 Inch Fan Grill
- •[Cooling FAN]  
- •The metal guard is constructed of C1008 Steel with a nickel-chrome finish
- •It has four holes that can be screwed onto any cooling fan with an 80-millimetre square frame
- •Able to withstand 220 pounds of pull force at each joint, the guard was designed to withstand heavy usage
Description
The Fence Sink Bracket for 9CM Cooling Fan 3.5 Inch Fan Grill is a high-grade, precision-tested electronic component designed for reliable performance in prototyping, education, industrial control, and custom hardware engineering.
🔹 Key Features
- •[Cooling FAN]  
- •The metal guard is constructed of C1008 Steel with a nickel-chrome finish
- •It has four holes that can be screwed onto any cooling fan with an 80-millimetre square frame
- •Able to withstand 220 pounds of pull force at each joint, the guard was designed to withstand heavy usage
- •Application: The fan guard creates a protective barrier between a fan’s blades and any foreign objects it may come into contact with
- •The blade is fragile and can be damaged if impacted by a foreign object during use
🔹 Pin Configuration & Wiring
⚠️ Direct MCU GPIO Connection Hazard
Fence Sink Bracket for 9CM Cooling Fan 3.5 Inch Fan Grill is an inductive electro-mechanical load drawing up to 200mA – 1A+ surge current. An ESP32 GPIO pin is rated for only 12mA (Arduino Uno is rated for 20mA).
Never wire this motor directly to ESP32 / Arduino pins. Doing so will immediately destroy the microcontroller's output transistors due to inrush current and reverse back-EMF inductive voltage spikes. Always use an intermediate motor driver or transistor switch with a common ground.
Recommended Driver & Interfacing Architectures
Select your interfacing method to inspect the exact wiring diagram & code
Connection Matrix
// Safe Motor & Air Pump PWM Speed Control using L298N Driver
// Tested for Arduino Uno & ESP32 (with ESP32 ledcWrite)
#define ENA_PIN 9 // Connect to L298N ENA (PWM speed control)
#define IN1_PIN 8 // Connect to L298N IN1 (Direction / ON)
#define IN2_PIN 7 // Connect to L298N IN2 (Direction / OFF)
void setup() {
pinMode(ENA_PIN, OUTPUT);
pinMode(IN1_PIN, OUTPUT);
pinMode(IN2_PIN, OUTPUT);
// Initialize driver in OFF state
digitalWrite(IN1_PIN, LOW);
digitalWrite(IN2_PIN, LOW);
analogWrite(ENA_PIN, 0);
}
void loop() {
// Soft start: ramp up speed to prevent inrush current spikes
digitalWrite(IN1_PIN, HIGH);
digitalWrite(IN2_PIN, LOW);
for (int speed = 100; speed <= 255; speed += 15) {
analogWrite(ENA_PIN, speed);
delay(50);
}
delay(3000); // Run motor at full speed for 3 seconds
// Coast to stop
digitalWrite(IN1_PIN, LOW);
digitalWrite(IN2_PIN, LOW);
analogWrite(ENA_PIN, 0);
delay(2000); // Pause for 2 seconds
}🔹 Applications
This component is engineered and suitable for:
- •DC motor speed regulation and soft start control
- •Robotics drive train and wheel speed adjustment
- •Cooling fans, exhaust blowers, and thermal management
- •Miniature water pumps and aquarium aeration systems
- •DIY electronics projects, automation circuits, and laboratory benches
🔹 Package Includes
- ✓1 × Fence Sink Bracket for 9CM Cooling Fan 3.5 Inch Fan Grill
Wholesale Tiered Pricing
Autonomous 4WD AI & Obstacle Rover Kit
Build a complete 4-wheel drive robotics rover with ultrasonic distance sensing & motor driver control.

Related products
Complementary hardware and compatible components for your project







