Unik Systems Logo
Unik Systems
SKU: #5596Sensors

Air Pump DIY Small 6V Silent Diaphragm Pump

—
₹119.00
(Inc. GST)
  • •[DC Air Pump] This 370 Diaphragm 6V Self-Priming Small Micro Vacuum Pump is a brand new and high-quality water pump
  • •Small size but strong
  • •low consumption and high efficiency
  • •Can be used as a diaphragm pump, water pump, water suction pump, vacuum pump
Out of stock
1
Check Delivery Availability of Your Pincode:
SKU: ET05596
Categories: All, Sensors
10 People watching this product right now!

Description

The Air Pump DIY Small 6V Silent Diaphragm Pump is a high-grade, precision-tested electronic component designed for reliable performance in prototyping, education, industrial control, and custom hardware engineering.

🔹 Key Features

  • •[DC Air Pump] This 370 Diaphragm 6V Self-Priming Small Micro Vacuum Pump is a brand new and high-quality water pump
  • •Small size but strong
  • •low consumption and high efficiency
  • •Can be used as a diaphragm pump, water pump, water suction pump, vacuum pump
  • •You can also use this pump to make automatic hand sanitizer dispenser
  • •Features: Mini electric vacuum pump with high air flow for good performance

🔹 Pin Configuration & Wiring

⚠️ Direct MCU GPIO Connection Hazard

Air Pump DIY Small 6V Silent Diaphragm Pump is an inductive electro-mechanical load drawing up to 200mA – 1A+ surge current. An ESP32 GPIO pin is rated for only 12mA (Arduino Uno is rated for 20mA).

Never wire this motor directly to ESP32 / Arduino pins. Doing so will immediately destroy the microcontroller's output transistors due to inrush current and reverse back-EMF inductive voltage spikes. Always use an intermediate motor driver or transistor switch with a common ground.

Recommended Driver & Interfacing Architectures

Select your interfacing method to inspect the exact wiring diagram & code

Connection Matrix

Arduino D9 / ESP32 GPIO 18L298N ENA (PWM Speed)
Arduino D8 / ESP32 GPIO 19L298N IN1 (Direction / Run)
Arduino D7 / ESP32 GPIO 21L298N IN2 (GND / Reverse)
External DC Power (+5V to +12V)L298N +12V Power In
MCU GND + Battery (-)L298N GND (Common Ground)
L298N OUT1 & OUT2Air Pump DIY Small 6V Silent Diaphragm Pump Terminals
Power Architecture Guidelines:
• Nominal Voltage: 3.7V - 6V DC
• Common Ground (GND): Always link the ground pin of the microcontroller with the negative terminal of your external battery pack.
• Flyback Diode: If using a discrete transistor or MOSFET, always place a 1N4007 or Schottky diode in reverse-bias across motor terminals to snub voltage spikes.
Arduino / ESP32 C++ Code
// Safe Motor & Air Pump PWM Speed Control using L298N Driver
// Tested for Arduino Uno & ESP32 (with ESP32 ledcWrite)

#define ENA_PIN 9   // Connect to L298N ENA (PWM speed control)
#define IN1_PIN 8   // Connect to L298N IN1 (Direction / ON)
#define IN2_PIN 7   // Connect to L298N IN2 (Direction / OFF)

void setup() {
  pinMode(ENA_PIN, OUTPUT);
  pinMode(IN1_PIN, OUTPUT);
  pinMode(IN2_PIN, OUTPUT);
  
  // Initialize driver in OFF state
  digitalWrite(IN1_PIN, LOW);
  digitalWrite(IN2_PIN, LOW);
  analogWrite(ENA_PIN, 0);
}

void loop() {
  // Soft start: ramp up speed to prevent inrush current spikes
  digitalWrite(IN1_PIN, HIGH);
  digitalWrite(IN2_PIN, LOW);
  
  for (int speed = 100; speed <= 255; speed += 15) {
    analogWrite(ENA_PIN, speed);
    delay(50);
  }
  
  delay(3000); // Run motor at full speed for 3 seconds
  
  // Coast to stop
  digitalWrite(IN1_PIN, LOW);
  digitalWrite(IN2_PIN, LOW);
  analogWrite(ENA_PIN, 0);
  
  delay(2000); // Pause for 2 seconds
}
Need a driver module for this project?
Explore Motor Drivers

🔹 Applications

This component is engineered and suitable for:

  • •Microcontroller interfacing (Arduino, ESP32, Raspberry Pi, STM32)
  • •IoT telemetry, environmental monitoring, and smart home systems
  • •Robotics navigation, obstacle detection, and motion sensing
  • •STEM education, university electronics labs, and maker prototyping

🔹 Package Includes

  • ✓1 × Air Pump DIY Small 6V Silent Diaphragm Pump

Wholesale Tiered Pricing

Robotics & SCM Bulk Discount
Selected Quantity:
Subtotal: ₹119.00 Inc. GST
Frequently Built With This BoardSAVE 12% ON BUNDLE

Autonomous 4WD AI & Obstacle Rover Kit

Build a complete 4-wheel drive robotics rover with ultrasonic distance sensing & motor driver control.

Complete Hardware Bill of Materials (BOM) Included:
Arduino Uno R3 Genuine Board
Ultrasonic Sensor HC-SR04
L298N Dual H-Bridge Motor Driver
4WD Smart Robot Chassis Kit
⚡ Build Time: 2 - 3 Hours•Difficulty: Beginner• All Genuine Silicon
Autonomous 4WD AI & Obstacle Rover Kit
Special Bundle Price
₹3,476₹3,950

Related products

Complementary hardware and compatible components for your project

See all in Sensors →
Capacitive Touch Module MPR121 — Sensors

Capacitive Touch Module MPR121

MPR121 capacitive touch module, multi-channel.

₹83.47
Inc. GST
IR Obstacle Avoider Sensor — Sensors

IR Obstacle Avoider Sensor

IR sensor with adjustable detection range and angle.

₹33.39
Inc. GST
Triple Axis Magnetometer — SensorsOnly 2 left

Triple Axis Magnetometer

3-axis magnetoresistive sensor for compass/orientation.

₹169.97
Inc. GST
MQ-2 Smoke Sensor — SensorsOnly 2 left

MQ-2 Smoke Sensor

MQ-2 smoke detection gas sensor.

₹106.23
Inc. GST
MQ-3 Alcohol/Ethanol Sensor — SensorsOnly 2 left

MQ-3 Alcohol/Ethanol Sensor

MQ-3 alcohol/ethanol gas sensor.

₹106.23
Inc. GST
MQ-4 Methane Natural Gas Sensor — SensorsOnly 2 left

MQ-4 Methane Natural Gas Sensor

MQ-4 methane / natural gas sensor.

₹87.00
Inc. GST
MQ-5 Methane Liquefied Gas Sensor — SensorsOnly 2 left

MQ-5 Methane Liquefied Gas Sensor

MQ-5 methane liquefied gas sensor.

₹92.00
Inc. GST
MQ-6 LPG Sensor — SensorsOnly 2 left

MQ-6 LPG Sensor

MQ-6 liquefied petroleum gas sensor.

₹93.00
Inc. GST